Skid Steer Snow Pusher Attachment – Commercial Snow Removal

When winter hits and the snow starts piling up, every minute counts. The Snow Pusher Extreme (SPX) from Stinger Attachments is built for operators who need to clear large amounts of snow quickly and efficiently without wasting time on constant trips to the pile. Manufactured with grade 50 steel and engineered for commercial-grade performance, this pusher is designed to handle the toughest winter conditions while saving you valuable seat time and fuel costs.

What sets the SPX apart is its smart, efficient design. With a full 30-inch by 30-inch box, this snow pusher moves significantly more snow per pass than traditional buckets. You're not stopping every few minutes to dump—you're pushing straight through, clearing parking lots, driveways, and large properties in a fraction of the time. For business owners, commercial contractors, and property managers dealing with tight deadlines and impatient customers, that time savings translates directly to increased profitability and the ability to take on more jobs per storm.

Stinger Attachments engineered the Snow Pusher Extreme with serious structural integrity. The rear moldboard on the 6-foot through 10-foot models is constructed from 3/16-inch grade 50 steel, while the larger 12-foot and 14-foot models step up to 1/4-inch grade 50 steel on both the moldboard and side plates. This isn't lightweight consumer equipment—it's commercial-grade steel built to withstand repeated impacts, heavy snow loads, and the kind of abuse that comes with long winter seasons and demanding jobsites.

The moldboard itself is supported by two large channels—upper and lower—that add exceptional strength and prevent flexing or warping under load. The side panels are reinforced at the critical stress points: the skids and dragback areas where wear and impact are most severe. This reinforcement extends the life of the pusher and keeps it working hard year after year without structural failure or costly repairs.

Forge Claw is proud to offer the Snow Pusher Extreme in seven different widths, ranging from 6 feet all the way up to 14 feet. This range ensures you can match the pusher perfectly to your machine's capacity and the specific demands of your property or contract work. Smaller machines and tighter spaces benefit from the 6-foot and 7-foot models, while larger loaders and wide-open parking lots can take full advantage of the 12-foot and 14-foot configurations for maximum productivity.

Every SPX comes standard with a bolt-on 3/4-inch by 6-inch steel cutting edge that bites into packed snow and ice with authority. You also get adjustable 3/4-inch wear skids that protect the pusher and allow you to fine-tune the angle and cutting depth based on surface conditions. When the cutting edge wears down, replacement is straightforward—just unbolt the old edge and bolt on a new one without specialized tools or downtime.

For operators who need versatility, the Snow Pusher Extreme offers optional rubber cutting edges and dragback bars. The 1.5-inch by 8-inch rubber cutting edge is ideal for delicate surfaces like stamped concrete, pavers, or decorative driveways where you need to clear snow without damaging the substrate. The 1-inch by 8-inch rubber dragback edge provides the same protection when pulling snow backward. Optional dragback bars—available with a bolt-on 1/2-inch by 6-inch steel edge—let you access tight corners, loading docks, and hard-to-reach areas where a forward push isn't practical. This flexibility makes the SPX a true year-round investment for property maintenance professionals.

The reinforced interior corner plates are another detail that separates this pusher from lighter-duty alternatives. Corners take tremendous stress during side loading and angled pushes, and Stinger Attachments reinforces these areas to prevent cracking and structural failure. It's the kind of engineering that might not be immediately visible, but you'll appreciate it after hundreds of hours of hard use.

Forge Claw partners with Stinger Attachments because they build equipment that holds up in the real world. The Snow Pusher Extreme isn't about flashy features or gimmicks—it's about solid construction, practical design, and reliable performance when the snow is falling and your customers are calling. We've seen firsthand how this pusher performs in commercial snow removal operations, and it consistently delivers the durability and efficiency operators demand.

Available with multiple mount offerings, the SPX fits a wide range of machines including skid steers, wheel loaders, tractors, and telehandlers. Whether you're running a compact skid steer for residential driveways or a large wheel loader for commercial parking lots, there's a Snow Pusher Extreme configuration that matches your equipment and workflow. Forge Claw offers shipping calculated at checkout on every Snow Pusher Extreme, so you can get the exact size and configuration you need delivered right to your door without hidden fees or surprise charges.

The sleek, efficient design of the SPX minimizes material buildup and allows snow to roll smoothly through the box without clogging or sticking. The 30-inch depth provides excellent containment even in heavy, wet snow, while the wide cutting edge ensures a clean scrape with every pass. You'll spend less time making multiple passes and more time moving to the next job, which means more revenue per storm and happier clients who appreciate fast, thorough service.

Built in the USA with American steel and American craftsmanship, the Snow Pusher Extreme represents a smart investment for anyone serious about snow removal. Stinger Attachments stands behind their work with a solid warranty, and Forge Claw stands behind every unit we sell with responsive customer service and expert support. When you order from Forge Claw, you're not just buying an attachment—you're partnering with a distributor that understands your business and is committed to your success.

• Available widths: 6-foot, 7-foot, 8-foot, 9-foot, 10-foot, 12-foot, and 14-foot
• Box dimensions: 30 inches high by 30 inches deep across all models
• Weight: 975 lbs (6-foot) to 1,650 lbs (14-foot)
• Moldboard construction: 3/16-inch grade 50 steel (6-foot through 10-foot models); 1/4-inch grade 50 steel (12-foot and 14-foot models)
• Side plate construction: 1/4-inch grade 50 steel on all models (6-foot through 14-foot)
• Standard cutting edge: Bolt-on 3/4-inch by 6-inch steel
• Optional rubber cutting edge: 1.5-inch by 8-inch
• Standard dragback edge: Bolt-on 1/2-inch by 6-inch steel (optional)
• Optional rubber dragback edge: 1-inch by 8-inch
• Adjustable wear skids: 3/4-inch thickness
• Structural support: Dual large channels (upper and lower) on moldboard
• Reinforced interior corner plates for added strength
• Multiple mount offerings available for various machine types
• Country of Origin: USA

• 30-inch by 30-inch box design — provides exceptional snow containment and capacity, allowing you to move significantly more material per pass while minimizing spillage and reducing total clearing time
• Grade 50 steel moldboard with dual channel support — delivers commercial-grade strength and rigidity that resists flexing and warping under heavy loads, ensuring consistent performance throughout the winter season
• Reinforced side plates at critical wear areas — protects against damage at the skids and dragback zones where stress and abrasion are most severe, extending the service life of the pusher
• Bolt-on replaceable cutting edges — allows quick, tool-free replacement of worn edges with either steel or rubber options, minimizing downtime and adapting to different surface types and customer requirements
• Adjustable 3/4-inch wear skids — lets you fine-tune the cutting angle and scraping depth based on surface conditions, operator preference, and snow type for optimal results every time
• Optional dragback bars — enables efficient snow removal in tight corners, loading docks, and confined spaces where forward pushing isn't practical, adding versatility to your winter service offerings
• Reinforced interior corner plates — strengthens the most vulnerable stress points to prevent cracking and structural failure during side loading and angled pushes
• Seven available widths from 6 to 14 feet — ensures perfect compatibility with your machine's capacity and allows you to match the pusher size to specific job requirements for maximum efficiency

The most immediate benefit of the Snow Pusher Extreme is the dramatic reduction in clearing time. Unlike using a bucket where you constantly stop to drive to the pile, dump, and return, the SPX lets you push straight through from start to finish. On large parking lots and commercial properties, this efficiency can cut your clearing time by 30 to 50 percent, allowing you to service more clients per storm and increase your revenue without adding equipment or labor.

Fuel savings add up quickly when you're not making constant trips to the snow pile. Every time you eliminate a dump cycle, you save fuel, reduce wear on your machine, and extend the intervals between maintenance. Over the course of a winter season with multiple storms, these savings become substantial. The SPX pays for itself through reduced operating costs and the ability to take on additional contracts that would otherwise exceed your capacity.

Durability is another major advantage. The grade 50 steel construction and heavy reinforcement mean this pusher will handle years of hard commercial use without bending, cracking, or failing. Cheaper pushers might save money upfront, but they'll cost you in repairs, downtime, and lost contracts when they fail during critical snow events. The Snow Pusher Extreme is built to be a long-term asset that performs reliably season after season, protecting your investment and your reputation.

The versatility of having both steel and rubber edge options, plus optional dragback bars, means you can handle a wider variety of jobs with a single attachment. Residential clients with decorative surfaces, commercial properties with strict damage policies, and municipal contracts with different surface requirements can all be serviced with the same pusher by simply swapping edges. This flexibility eliminates the need for multiple specialized attachments and streamlines your equipment inventory.

Productivity improvements extend beyond just speed. The 30-inch box depth provides excellent containment even in heavy, wet snow, which means fewer passes and cleaner results. Your operators will appreciate the smooth, predictable performance that comes from quality engineering and solid construction. Less frustration, fewer equipment issues, and better results translate to higher crew morale and better service quality for your clients.

The ability to choose from seven different widths ensures you're not over-equipped or under-equipped for any job. A 6-foot pusher is perfect for residential driveways and smaller commercial lots, while a 14-foot model can transform the efficiency of large parking lot clearing operations. Matching the right size to the job maximizes productivity and minimizes wasted capacity, helping you optimize both your equipment investment and your labor costs.

Finally, the Snow Pusher Extreme enhances your professional image. Showing up with well-built, purpose-designed equipment demonstrates that you're serious about your work and committed to delivering quality service. Clients notice the difference between contractors running worn-out, cobbled-together equipment and professionals using commercial-grade attachments. That perception translates into higher contract values, better client retention, and referrals that grow your business year after year.

The Snow Pusher Extreme is ideal for commercial snow removal contractors, property management companies, municipalities, landscaping businesses offering winter services, and large property owners who handle their own snow clearing. It's particularly well-suited for parking lots, shopping centers, industrial facilities, airports, and any application where efficiency and uptime are critical. Residential contractors working high-end properties will also appreciate the rubber edge option for protecting decorative surfaces.

Compatibility is straightforward across most common loader and skid steer platforms. Stinger Attachments offers multiple mount options, so whether you're running a universal skid steer quick attach, a wheel loader coupler, or a tractor-specific mount, there's a configuration that fits your machine. If you have questions about compatibility with your specific equipment, Forge Claw's knowledgeable team can help you select the right mount and pusher size for optimal performance.

Operating tips for maximum efficiency include maintaining consistent forward speed and avoiding sudden stops that can cause snow to spill over the top of the box. Adjust your wear skids based on the surface you're clearing—lower for asphalt and concrete where you want aggressive scraping, slightly higher for gravel or uneven surfaces. When using dragback bars, work methodically from the outside in to avoid creating piles that block your path. Keep cutting edges sharp and replace them promptly when wear becomes excessive to maintain clean scraping performance.

Maintenance requirements are minimal but important. Inspect bolts and fasteners regularly, especially after the first few uses of the season, and tighten as needed. Check wear skids and cutting edges frequently during heavy use and replace before they wear down to the base material. Store the pusher under cover when possible to protect against corrosion, and touch up any paint chips or scratches to prevent rust from starting. A few minutes of preventive maintenance after each major storm will keep your Snow Pusher Extreme performing like new for years.

Manufactured by Stinger Attachments, this product is covered under the manufacturer's 2-year warranty for defects in materials and workmanship. Forge Claw proudly stands behind every unit we sell and offers shipping calculated at checkout on all heavy machinery attachments. Order your Snow Pusher Extreme (SPX) from Forge Claw today. We offer flexible, easy financing and shipping calculated at checkout so every operator can get their hands on top-quality equipment.