Quick attach plates let you swap heavy equipment attachments in under 60 seconds β a job that takes 20 to 30 minutes with traditional pin-on connections. Installing a quick attach plate requires a wrench set, torque wrench, grease gun, and...
Using 3 point augers to dig fence post holes takes 1 to 3 minutes per hole once the tractor and auger are set up correctly. The full process β from hitch attachment through drilling a line of post holes β...
3-point stump grinders attach to a tractor's rear hitch and use PTO power to spin a cutting wheel through tree stumps at or below ground level. The full process β from hookup to cleanup β takes 15 to 45 minutes...
Using pallet forks on a tractor takes about 10 to 15 minutes from attachment to first load β assuming the right mount type, fork length, and loader capacity are matched beforehand. The process requires a front-end loader with a compatible...
Learning how to adjust a 3-point hitch on a brush hog takes 15 to 30 minutes with basic hand tools and a flat surface. The process involves side-to-side leveling through the lower lift arms, front-to-back pitch correction through the top...
A hay bale spear turns any skid steer, tractor, or front loader into a dedicated bale-moving machine β and getting the right one dialed in takes about 15 to 30 minutes of mounting time once you know what to look...
Get $150 off your first order — plus a real equipment specialist to help you pick the right one.
No call center. You’ll reach Dan —
he knows what bolts up to what.
No-markup freight·Warranty honored
Use this code at checkout:
Valid on orders of $1,500+. One use per customer.
We also sent it to your inbox.
Got questions first? Reply to the
email we just sent, or call Dan direct —
(888) 388-6514
